Nude - Soak-Off Builder in Jar

Soak-Off Builders in Jar Bundle

The soak off builder gels are soft and flexible at the same time, the increas the nail's flexibility which means that nails are less likely to break. Plus your manicure will last longer. 

Formula & Curing time:

• Comes in Jar - easy to take out the material with an application brush
• Thickness of the formula is normal
• A high self-leveling formula which ensure a smooth foundation layer
• Can be used to encapsulate nail art products (flakes, glitters, dried flowers, etc)
• 4 minutes by UV Lamp, 3 minutes by LED - 30 seconds in pro LED lamp
• Size of the jar: 15 ml | 0.5 oz

How to apply builders for strengthening your nails:  

• Apply base coat and cure it under the UV/LED lamp. 
• Apply a thin layer of builder gel and cure it under the UV/LED lamp. 
• You can apply a soak off gel color of your choice and cure it under the UV/LED lamp. 

• Final step: apply one layer of top coat and cure it under the UV/LED lamp. 

   

How to apply builders to create nail extensions (you will need paper nail forms):

• Clean and prep your nails.
• Apply one layer of regular base coat gel and cure for 30 seconds under the UV/LED lamp. 
• Fix the paper nail form to your finger.
• Apply one thin layer of soak-off builder gel polish. Don’t cure, you need this layer to remain wet.
• You can now start building your nails.  Take a small amount of builder gel polish and start applying it in a circular motion towards the free edge and spread it over the entire nail.
• Allow the product to level out. Turn the hand upside down and make sure that the builder gel polish stays in the center of the nail. 
• Remove the sticky layer.
• File for perfection - use a 180 grit file.
• You can apply Top Coat Gel Polish and leave the natural builder shade or apply a Soak-Off Gel Polish color on top.

Applications Steps:

• NOT MANDATORY to prep your nails. However, we do recommend it: ensure all cuticles are removed and pushed back from the nail plate, buff the nail plate to remove shine & clean with alcohol to remove all oils and dust.
  Apply one layer of regular base coat gel and cure for 30 seconds under the UV/LED lamp.
  They are very pigmented, and a little goes a long way. Application should be thin in order to avoid wrinkling. Cure it for 1 minute by LED, 2 minutes by UV lamp. If working on nail pops (which sits higher in the lamp) - apply in thin layers and use low heat mode.
• NOT MANDATORY: Apply one layer of regular top coat gel and cure for 30-60 seconds under the UV/LED lamp.